Keysight Technologies InfiniiVision 3000T X Series - :ACQuire Commands

231
Keysight InfiniiVision 3000T X-Series Oscilloscopes
Programmer's Guide
7 :ACQuire Commands
Set the parameters for acquiring and storing data. See "Introduction to :ACQuire
Commands" on page 231.
Introduction to
:ACQuire
Commands
The ACQuire subsystem controls the way in which waveforms are acquired. These
acquisition types are available: normal, averaging, peak detect, and high
resolution.
Normal
Table 85 :ACQuire Commands Summary
Command Query Options and Query Returns
:ACQuire:COMPlete
<complete> (see
page 233)
:ACQuire:COMPlete?
(see page 233)
<complete> ::= 100; an integer in
NR1 format
:ACQuire:COUNt
<count> (see page 234)
:ACQuire:COUNt? (see
page 234)
<count> ::= an integer from 2 to
65536 in NR1 format
:ACQuire:MODE <mode>
(see page 235)
:ACQuire:MODE? (see
page 235)
<mode> ::= {RTIMe | ETIMe |
SEGMented}
n/a :ACQuire:POINts? (see
page 236)
<# points> ::= an integer in NR1
format
:ACQuire:SEGMented:AN
ALyze (see page 237)
n/a n/a (with Option SGM)
:ACQuire:SEGMented:CO
UNt <count> (see
page 238)
:ACQuire:SEGMented:CO
UNt? (see page 238)
<count> ::= an integer from 2 to
1000 in NR1 format (with Option
SGM)
:ACQuire:SEGMented:IN
Dex <index> (see
page 239)
:ACQuire:SEGMented:IN
Dex? (see page 239)
<index> ::= an integer from 1 to
1000 in NR1 format (with Option
SGM)
n/a :ACQuire:SRATe? (see
page 242)
<sample_rate> ::= sample rate
(samples/s) in NR3 format
:ACQuire:TYPE <type>
(see page 243)
:ACQuire:TYPE? (see
page 243)
<type> ::= {NORMal | AVERage |
HRESolution | PEAK}