Keysight Technologies InfiniiVision 3000T X Series User Manual

:TRIGger Commands 33
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1051
:TRIGger:PATTern:FORMat
(see page 1276)
Command Syntax
:TRIGger:PATTern:FORMat <base>
<base> ::= {ASCii | HEX}
The :TRIGger:PATTern:FORMat command sets the entry (and query) number base
used by the :TRIGger:PATTern command. The default <base> is ASCii.
Query Syntax
:TRIGger:PATTern:FORMat?
The :TRIGger:PATTern:FORMat? query returns the currently set number base for
pattern trigger patterns.
Return Format
<base><NL>
<base> ::= {ASC | HEX}
See Also • "Introduction to :TRIGger Commands" on page 1007
• ":TRIGger:PATTern" on page 1049

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English