1120 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
34 :WAVeform Commands
:WAVeform:XORigin
(see page 1276)
Query Syntax
:WAVeform:XORigin?
The :WAVeform:XORigin? query returns the x-origin value for the currently
specified source. XORigin is the X-axis value of the data point specified by the
:WAVeform:XREFerence value. In this product, that is always the X-axis value of
the first data point (XREFerence = 0).
Return Format
<value><NL>
<value> ::= x-origin value in the current preamble in 64-bit
floating point NR3 format
See Also • "Introduction to :WAVeform Commands" on page 1091
• ":WAVeform:PREamble" on page 1106
• ":WAVeform:XREFerence" on page 1121
Example Code • "Example Code" on page 1107
To Next Page
Loading...
