Keysight Technologies InfiniiVision 3000T X Series User Manual

:SEARch Commands 30
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 933
:SEARch:SERial:CAN:SYMBolic:MESSage
(see page 1276)
Command Syntax
:SEARch:SERial:CAN:SYMBolic:MESSage <name>
<name> ::= quoted ASCII string
The :SEARch:SERial:CAN:SYMBolic:MESSage command specifies the message to
search for when CAN symbolic data has been loaded (recalled) into the
oscilloscope and the CAN serial search mode is set to MESSage or MSIGnal.
Query Syntax
:SEARch:SERial:CAN:SYMBolic:MESSage?
The :SEARch:SERial:CAN:SYMBolic:MESSage? query returns the specified
message.
Return Format
<name><NL>
<name> ::= quotes ASCII string
See Also • ":RECall:DBC[:STARt]" on page 660
• ":SEARch:SERial:CAN:MODE" on page 927
• ":SEARch:SERial:CAN:SYMBolic:SIGNal" on page 934
• ":SEARch:SERial:CAN:SYMBolic:VALue" on page 935

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English