Keysight Technologies InfiniiVision 3000T X Series - :SBUS<n>:CAN:TRIGger:SYMBolic:MESSage

:SBUS<n> Commands 29
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 745
:SBUS<n>:CAN:TRIGger:SYMBolic:MESSage
(see page 1276)
Command Syntax
:SBUS<n>:CAN:TRIGger:SYMBolic:MESSage <name>
<name> ::= quoted ASCII string
The :SBUS<n>:CAN:TRIGger:SYMBolic:MESSage command specifies the message
to trigger on when CAN symbolic data has been loaded (recalled) into the
oscilloscope and the CAN trigger mode is set to MESSage or MSIGnal.
Query Syntax
:SBUS<n>:CAN:TRIGger:SYMBolic:MESSage?
The :SBUS<n>:CAN:TRIGger:SYMBolic:MESSage? query returns the specified
message.
Return Format
<name><NL>
<name> ::= quoted ASCII string
See Also • ":RECall:DBC[:STARt]" on page 660
• ":SBUS<n>:CAN:TRIGger" on page 735
• ":SBUS<n>:CAN:TRIGger:SYMBolic:SIGNal" on page 746
• ":SBUS<n>:CAN:TRIGger:SYMBolic:VALue" on page 747