Keysight Technologies InfiniiVision 3000T X Series User Manual

:SEARch Commands 30
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 951
:SEARch:SERial:IIC:PATTern:ADDRess
(see page 1276)
Command Syntax
:SEARch:SERial:IIC:PATTern:ADDRess <value>
<value> ::= integer or <string>
<string> ::= "0xnn" n ::= {0,..,9 | A,..,F}
The :SEARch:SERial:IIC:PATTern:ADDRess command specifies address values
when searching for IIC events.
To set don't care values, use the integer -1.
Query Syntax
:SEARch:SERial:IIC:PATTern:ADDRess?
The :SEARch:SERial:IIC:PATTern:ADDRess? query returns the current address
value setting.
Return Format
<value><NL>
<value> ::= integer
See Also • Chapter 30, “:SEARch Commands,” starting on page 889
• ":SEARch:SERial:IIC:MODE" on page 949

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English