262 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
9 :CALibrate Commands
:CALibrate:STATus
(see page 1276)
Query Syntax
:CALibrate:STATus?
The :CALibrate:STATus? query returns the summary results of the last user
calibration procedure.
Return Format
<return value><NL>
<return value> ::= <status_code>,<status_string>
<status_code> ::= an integer status code
<status_string> ::= an ASCII status string
The status codes and strings can be:
See Also • "Introduction to :CALibrate Commands" on page 256
Status Code Status String
+0 Calibrated
-1 Not Calibrated
To Next Page
Loading...
