Keysight Technologies InfiniiVision 3000T X Series - :SBUS<n>:CAN:COUNt:UTILization

:SBUS<n> Commands 29
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 727
:SBUS<n>:CAN:COUNt:UTILization
(see page 1276)
Query Syntax
:SBUS<n>:CAN:COUNt:UTILization?
Returns the percent utilization.
Return Format
<percent><NL>
<percent> ::= floating-point in NR3 format
Errors • "-241, Hardware missing" on page 1235
See Also • ":SBUS<n>:CAN:COUNt:RESet" on page 724
• "Introduction to :SBUS<n> Commands" on page 697
• ":SBUS<n>:MODE" on page 701
• ":SBUS<n>:CAN Commands" on page 719