1098 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
34 :WAVeform Commands
:WAVeform:COUNt
(see page 1276)
Query Syntax
:WAVeform:COUNt?
The :WAVeform:COUNT? query returns the count used to acquire the current
waveform. This may differ from current values if the unit has been stopped and its
configuration modified. For all acquisition types except average, this value is 1.
Return Format
<count_argument><NL>
<count_argument> ::= an integer from 1 to 65536 in NR1 format
See Also • "Introduction to :WAVeform Commands" on page 1091
• ":ACQuire:COUNt" on page 234
• ":ACQuire:TYPE" on page 243
To Next Page
Loading...
