Keysight Technologies InfiniiVision 3000T X Series - :SAVE:IMAGe:FORMat

:SAVE Commands 28
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 675
:SAVE:IMAGe:FORMat
(see page 1276)
Command Syntax
:SAVE:IMAGe:FORMat <format>
<format> ::= {{BMP | BMP24bit} | BMP8bit | PNG}
The :SAVE:IMAGe:FORMat command sets the image format type.
Query Syntax
:SAVE:IMAGe:FORMat?
The :SAVE:IMAGe:FORMat? query returns the selected image format type.
Return Format
<format><NL>
<format> ::= {BMP | BMP8 | PNG | NONE}
When NONE is returned, it indicates that a waveform data file format is currently
selected.
See Also • "Introduction to :SAVE Commands" on page 669
• ":SAVE:IMAGe[:STARt]" on page 673
• ":SAVE:IMAGe:FACTors" on page 674
• ":SAVE:IMAGe:INKSaver" on page 676
• ":SAVE:IMAGe:PALette" on page 677
• ":SAVE:WAVeform:FORMat" on page 691