Keysight Technologies InfiniiVision 3000T X Series - :COUNter:ENABle

290 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
11 :COUNter Commands
:COUNter:ENABle
(see page 1276)
Command Syntax
:COUNter:ENABle {{0 | OFF} | {1 | ON}}
The :COUNter:ENABle command enables or disables the counter feature.
Query Syntax
:COUNter:ENABle?
The :COUNter:ENABle? query returns whether the counter is enabled or disabled.
Return Format
<off_on><NL>
{0 | 1}
See Also • ":COUNter:CURRent" on page 289
• ":COUNter:MODE" on page 291
• ":COUNter:NDIGits" on page 292
• ":COUNter:SOURce" on page 293