Keysight Technologies InfiniiVision 3000T X Series User Manual

:MEASure Commands 22
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 483
:MEASure:NPULses
(see page 1276)
Command Syntax
:MEASure:NPULses [<source>]
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1 to (# math functions) in NR1 format
<r> ::= 1 to (# ref waveforms) in NR1 format
The :MEASure:NPULses command installs a falling pulse count measurement on
screen. If the optional source parameter is not specified, the current source is
measured.
Query Syntax
:MEASure:NPULses? [<source>]
The :MEASure:NPULses? query measures and returns the on-screen falling pulse
count.
Return Format
<value><NL>
<value> ::= the falling pulse count in NR3 format
See Also • "Introduction to :MEASure Commands" on page 458
• ":MEASure:SOURce" on page 499
NOTE
This command is not available if the source is FFT (Fast Fourier Transform).

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English