:SYSTem Commands 31
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 985
:SYSTem:PERSona[:MANufacturer]
(see page 1276)
Command Syntax
:SYSTem:PERSona[:MANufacturer] <manufacturer_string>
<manufacturer_string> ::= ::= quoted ASCII string, up to 63 characters
The :SYSTem:PERSona[:MANufacturer] command lets you change the
manufacturer string portion of the identification string returned by the *IDN?
query.
The default manufacturer string is "KEYSIGHT TECHNOLOGIES".
If your remote programs depend on a legacy manufacturer string, for example, you
could use this command to set the manufacturer string to "AGILENT
TECHNOLOGIES".
Query Syntax
:SYSTem:PERSona[:MANufacturer]?
The :SYSTem:PERSona[:MANufacturer]? query returns the currently set
manufacturer string.
Return Format
<manufacturer_string><NL>
See Also • "*IDN (Identification Number)" on page 174
• ":SYSTem:PERSona[:MANufacturer]:DEFault" on page 986
• "Introduction to :SYSTem Commands" on page 980
To Next Page
Loading...
