To Next Page

To Previous Page

:MEASure Commands 22

Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 523

:MEASure:XMIN

(see page 1276)

Command Syntax

:MEASure:XMIN [<source>]

<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m> | WMEMory<r>}

<n> ::= 1-2 or 1-4 (# of analog channels) in NR1 format

<m> ::= 1 to (# math functions) in NR1 format

<r> ::= 1 to (# ref waveforms) in NR1 format

The :MEASure:XMIN command installs a screen measurement and starts an

X-at-Min-Y measurement on the selected window. If the optional source

parameter is specified, the current source is modified.

Query Syntax

:MEASure:XMIN? [<source>]

The :MEASure:XMIN? query measures and returns the horizontal axis value at

which the minimum vertical value occurs. If the optional source is specified, the

current source is modified. If all channels are off, the query returns 9.9E+37.

Return Format

<value> ::= horizontal value of the minimum in NR3 format

See Also • "Introduction to :MEASure Commands" on page 458

• ":MEASure:XMAX" on page 522

• ":MEASure:TMIN" on page 1207

NOTE

:MEASure:XMIN is an alias for :MEASure:TMIN.

Keysight Technologies InfiniiVision 3000T X Series User Manual

Questions and Answers: