Keysight Technologies InfiniiVision 3000T X Series - :SEARch:SERial:UART Commands

974 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
30 :SEARch Commands
:SEARch:SERial:UART Commands
Table 133 :SEARch:SERial:UART Commands Summary
Command Query Options and Query Returns
:SEARch:SERial:UART:D
ATA <value> (see
page 975)
:SEARch:SERial:UART:D
ATA? (see page 975)
<value> ::= 8-bit integer from
0-255 (0x00-0xff) in decimal,
<hexadecimal>, <binary>, or
<quoted_string> format
<hexadecimal> ::= #Hnn where n
::= {0,..,9| A,..,F} for
hexadecimal
<binary> ::= #Bnn...n where n ::=
{0 | 1} for binary
<quoted_string> ::= any of the
128 valid 7-bit ASCII characters
(or standard abbreviations)
:SEARch:SERial:UART:M
ODE <value> (see
page 976)
:SEARch:SERial:UART:M
ODE? (see page 976)
<value> ::= {RDATa | RD1 | RD0 |
RDX | TDATa | TD1 | TD0 | TDX |
PARityerror | AERRor}
:SEARch:SERial:UART:Q
UALifier <value> (see
page 977)
:SEARch:SERial:UART:Q
UALifier? (see
page 977)
<value> ::= {EQUal | NOTequal |
GREaterthan | LESSthan}