To Next Page

To Previous Page

1206 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide

37 Obsolete and Discontinued Commands

:MEASure:TMAX

(see page 1276)

Command Syntax

:MEASure:TMAX [<source>]

<source> ::= {CHANnel<n> | FUNCtion | MATH}

<n> ::= 1 to (# analog channels) in NR1 format

The :MEASure:TMAX command installs a screen measurement and starts an

X-at-Max-Y measurement on the selected waveform. If the optional source is

specified, the current source is modified.

Query Syntax

:MEASure:TMAX? [<source>]

The :MEASure:TMAX? query returns the horizontal axis value at which the

maximum vertical value occurs on the current source. If the optional source is

specified, the current source is modified. If all channels are off, the query returns

9.9E+37.

Return Format

<value> ::= time at maximum in NR3 format

See Also • "Introduction to :MEASure Commands" on page 458

• ":MEASure:TMIN" on page 1207

• ":MEASure:XMAX" on page 522

• ":MEASure:XMIN" on page 523

NOTE

The :MEASure:TMAX command is obsolete and is provided for backward compatibility to

previous oscilloscopes. Use the :MEASure:XMAX command (see page 522) instead.

Keysight Technologies InfiniiVision 3000T X Series User Manual

Questions and Answers: