Keysight Technologies InfiniiVision 3000T X Series - :HARDcopy:PALette

:HARDcopy Commands 19
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 417
:HARDcopy:PALette
(see page 1276)
Command Syntax
:HARDcopy:PALette <palette>
<palette> ::= {COLor | GRAYscale | NONE}
The :HARDcopy:PALette command sets the hardcopy palette color.
The oscilloscope's print driver cannot print color images to color laser printers, so
the COLor option is not available when connected to laser printers.
Query Syntax
:HARDcopy:PALette?
The :HARDcopy:PALette? query returns the selected hardcopy palette color.
Return Format
<palette><NL>
<palette> ::= {COL | GRAY | NONE}
See Also • "Introduction to :HARDcopy Commands" on page 404
• ":HARDcopy:STARt" on page 419
• ":HARDcopy:FACTors" on page 407
• ":HARDcopy:LAYout" on page 410
• ":HARDcopy:FFEed" on page 408
• ":HARDcopy:INKSaver" on page 409