Keysight Technologies InfiniiVision 3000T X Series User Manual

:ACQuire Commands 7
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 235
:ACQuire:MODE
(see page 1276)
Command Syntax
:ACQuire:MODE <mode>
<mode> ::= {RTIMe | SEGMented}
The :ACQuire:MODE command sets the acquisition mode of the oscilloscope.
• The :ACQuire:MODE RTIMe command sets the oscilloscope in real time mode.
• The :ACQuire:MODE SEGMented command sets the oscilloscope in segmented
memory mode.
Query Syntax
:ACQuire:MODE?
The :ACQuire:MODE? query returns the acquisition mode of the oscilloscope.
Return Format
<mode_argument><NL>
<mode_argument> ::= {RTIM | SEGM}
See Also • "Introduction to :ACQuire Commands" on page 231
• ":ACQuire:TYPE" on page 243
NOTE
The obsolete command ACQuire:TYPE:REALtime is functionally equivalent to sending
ACQuire:MODE RTIMe; TYPE NORMal.

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English