:SEARch Commands 30
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 943
:SEARch:SERial:I2S:AUDio
(see page 1276)
Command Syntax
:SEARch:SERial:I2S:AUDio
<audio_ch>
<audio_ch> ::= {RIGHt | LEFT | EITHer}
The :SEARch:SERial:I2S:AUDio command specifies the channel on which to search
for I2S events: right, left, or either channel.
Query Syntax
:SEARch:SERial:I2S:AUDio?
The :SEARch:SERial:I2S:AUDio? query returns the current channel setting.
Return Format
<audio_ch><NL>
<audio_ch> ::= {RIGH | LEFT | EITH}
See Also • Chapter 30, “:SEARch Commands,” starting on page 889
• ":SEARch:SERial:I2S:MODE" on page 944
To Next Page
Loading...
