:WAVeform Commands 34
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1123
:WAVeform:YORigin
(see page 1276)
Query Syntax
:WAVeform:YORigin?
The :WAVeform:YORigin? query returns the y-origin value for the currently
specified source. This value is the Y-axis value of the data value specified by the
:WAVeform:YREFerence value. For this product, this is the Y-axis value of the
center of the screen.
Return Format
<value><NL>
<value> ::= y-origin in the current preamble in 32-bit
floating point NR3 format
See Also • "Introduction to :WAVeform Commands" on page 1091
• ":WAVeform:PREamble" on page 1106
• ":WAVeform:YREFerence" on page 1124
Example Code • "Example Code" on page 1107
To Next Page
Loading...
