Keysight Technologies InfiniiVision 3000T X Series - :SEARch:EDGE:SOURce

:SEARch Commands 30
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 897
:SEARch:EDGE:SOURce
(see page 1276)
Command Syntax
:SEARch:EDGE:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :SEARch:EDGE:SOURce command selects the channel on which to search for
edges.
Query Syntax
:SEARch:EDGE:SOURce?
The :SEARch:EDGE:SOURce? query returns the current source.
Return Format
<source><NL>
<source> ::= CHAN<n>
See Also • Chapter 30, “:SEARch Commands,” starting on page 889