Keysight Technologies InfiniiVision 3000T X Series - :HARDcopy:NETWork:DOMain

:HARDcopy Commands 19
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 413
:HARDcopy:NETWork:DOMain
(see page 1276)
Command Syntax
:HARDcopy:NETWork:DOMain <domain>
<domain> ::= quoted ASCII string
The :HARDcopy:NETWork:DOMain command sets the Windows network domain
name.
The domain name setting is a common setting for both network printer slots.
Query Syntax
:HARDcopy:NETWork:DOMain?
The :HARDcopy:NETWork:DOMain? query returns the current Windows network
domain name.
Return Format
<domain><NL>
<domain> ::= quoted ASCII string
See Also • "Introduction to :HARDcopy Commands" on page 404
• ":HARDcopy:NETWork:SLOT" on page 415
• ":HARDcopy:NETWork:APPLy" on page 412
• ":HARDcopy:NETWork:ADDRess" on page 411
• ":HARDcopy:NETWork:USERname" on page 416
• ":HARDcopy:NETWork:PASSword" on page 414