Obsolete and Discontinued Commands 37
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1201
:HARDcopy:PDRiver
(see page 1276)
Command Syntax
:HARDcopy:PDRiver <driver>
<driver> ::= {AP2Xxx | AP21xx | {AP2560 | AP25} | {DJ350 | DJ35} |
DJ6xx | {DJ630 | DJ63} | DJ6Special | DJ6Photo |
DJ8Special | DJ8xx | DJ9Vip | OJPRokx50 | DJ9xx | GVIP |
DJ55xx | {PS470 | PS47} {PS100 | PS10} | CLASer |
MLASer | LJFastraster | POSTscript}
The HARDcopy:PDRiver command sets the hardcopy printer driver used for the
selected printer.
If the correct driver for the selected printer can be identified, it will be selected and
cannot be changed.
Query Syntax
:HARDcopy:PDRiver?
The :HARDcopy:PDRiver? query returns the selected hardcopy printer driver.
Return Format
<driver><NL>
<driver> ::= {AP2X | AP21 | AP25 | DJ35 | DJ6 | DJ63 | DJ6S | DJ6P |
DJ8S | DJ8 | DJ9V | OJPR | DJ9 | GVIP | DJ55 | PS10 |
PS47 | CLAS | MLAS | LJF | POST}
See Also • "Introduction to :HARDcopy Commands" on page 404
The :HARDcopy:PDRiver command is an obsolete command provided for compatibility to
previous oscilloscopes. Use the :HARDcopy:APRinter (see page 406) command instead.
To Next Page
Loading...
