Keysight Technologies InfiniiVision 3000T X Series - :CALibrate:TEMPerature

:CALibrate Commands 9
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 263
:CALibrate:TEMPerature
(see page 1276)
Query Syntax
:CALibrate:TEMPerature?
The :CALibrate:TEMPerature? query returns the change in temperature since the
last user calibration procedure.
Return Format
<return value><NL>
<return value> ::= degrees C delta since last cal in NR3 format
See Also • "Introduction to :CALibrate Commands" on page 256