Keysight Technologies InfiniiVision 3000T X Series User Manual

:POWer Commands 26
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 635
:POWer:SIGNals:VMAXimum:INRush
(see page 1276)
Command Syntax
:POWer:SIGNals:VMAXimum:INRush <value>[suffix]
<value> ::= Maximum expected input Voltage in NR3 format
[suffix] ::= {V | mV}
The :POWer:SIGNals:VMAXimum:INRush command specifies the maximum
expected input voltage. This value is used to set the vertical scale of the channel
probing voltage for inrush current analysis.
Query Syntax
:POWer:SIGNals:VMAXimum:INRush?
The :POWer:SIGNals:VMAXimum:INRush query returns the expected maximum
input voltage setting.
Return Format
<value><NL>
<value> ::= Maximum expected input Voltage in NR3 format
See Also • ":POWer:INRush:APPLy" on page 608
• ":POWer:SIGNals:AUTosetup" on page 624
• ":POWer:SIGNals:IEXPected" on page 633
• ":POWer:SIGNals:OVERshoot" on page 634
• ":POWer:SIGNals:SOURce:CURRent<i>" on page 641
• ":POWer:SIGNals:SOURce:VOLTage<i>" on page 642

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English