Keysight Technologies InfiniiVision 3000T X Series - :MEASure:STATistics:DISPlay

502 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
22 :MEASure Commands
:MEASure:STATistics:DISPlay
(see page 1276)
Command Syntax
:MEASure:STATistics:DISPlay {{0 | OFF} | {1 | ON}}
The :MEASure:STATistics:DISPlay command disables or enables the display of the
measurement statistics.
Query Syntax
:MEASure:STATistics:DISPlay?
The :MEASure:STATistics:DISPlay? query returns the state of the measurement
statistics display.
Return Format
{0 | 1}<NL>
See Also • "Introduction to :MEASure Commands" on page 458
• ":MEASure:RESults" on page 493
• ":MEASure:STATistics" on page 501
• ":MEASure:STATistics:MCOunt" on page 504
• ":MEASure:STATistics:RESet" on page 505
• ":MEASure:STATistics:INCRement" on page 503
• ":MEASure:STATistics:RSDeviation" on page 506