Keysight Technologies InfiniiVision 3000T X Series - :SEARch:SERial:SPI:PATTern:WIDTh

:SEARch Commands 30
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 973
:SEARch:SERial:SPI:PATTern:WIDTh
(see page 1276)
Command Syntax
:SEARch:SERial:SPI:PATTern:WIDTh <width>
<width> ::= integer from 1 to 10
The :SEARch:SERial:SPI:PATTern:WIDTh command specifies the width of the data
value (in bytes) when searching for SPI events.
The data value is specified using the :SEARch:SERial:SPI:PATTern:DATA command.
Query Syntax
:SEARch:SERial:SPI:PATTern:WIDTh?
The :SEARch:SERial:SPI:PATTern:WIDTh? query returns the current data width
setting.
Return Format
<width><NL>
<width> ::= integer from 1 to 10
See Also • Chapter 30, “:SEARch Commands,” starting on page 889
• ":SEARch:SERial:SPI:PATTern:DATA" on page 972