Keysight Technologies InfiniiVision 3000T X Series - :HARDcopy:NETWork:PASSword

414 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
19 :HARDcopy Commands
:HARDcopy:NETWork:PASSword
(see page 1276)
Command Syntax
:HARDcopy:NETWork:PASSword <password>
<password> ::= quoted ASCII string
The :HARDcopy:NETWork:PASSword command sets the password for the
specified Windows network domain and user name.
The password setting is a common setting for both network printer slots.
See Also • "Introduction to :HARDcopy Commands" on page 404
• ":HARDcopy:NETWork:USERname" on page 416
• ":HARDcopy:NETWork:DOMain" on page 413
• ":HARDcopy:NETWork:SLOT" on page 415
• ":HARDcopy:NETWork:APPLy" on page 412
• ":HARDcopy:NETWork:ADDRess" on page 411