Keysight Technologies InfiniiVision 3000T X Series - :FUNCtion<m>:LINear:OFFSet

388 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
18 :FUNCtion<m> Commands
:FUNCtion<m>:LINear:OFFSet
(see page 1276)
Command Syntax
:FUNCtion<m>:LINear:OFFSet <value>
<m> ::= 1 to (# math functions) in NR1 format
<value> ::= 'B' in Ax + B, value in NR3 format
The :FUNCtion<m>:LINear:OFFSet command specifies the 'B' value in the Ax + B
operation.
Query Syntax
:FUNCtion<m>:LINear:OFFSet?
The :FUNCtion<m>:LINear:OFFSet query returns the offset value.
Return Format
<value><NL>
<value> ::= 'B' in Ax + B, value in NR3 format
See Also • ":FUNCtion<m>:OPERation" on page 390