Keysight Technologies InfiniiVision 3000T X Series - :WGEN<w>:FUNCtion:RAMP:SYMMetry

1142 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
35 :WGEN<w> Commands
:WGEN<w>:FUNCtion:RAMP:SYMMetry
(see page 1276)
Command Syntax
:WGEN<w>:FUNCtion:RAMP:SYMMetry <percent>
<w> ::= 1 or 2 in NR1 format
<percent> ::= symmetry percentage from 0% to 100% in NR3 format
For Ramp waveforms, the :WGEN<w>:FUNCtion:RAMP:SYMMetry command
specifies the symmetry of the waveform.
Symmetry represents the amount of time per cycle that the ramp waveform is
rising.
Query Syntax
:WGEN<w>:FUNCtion:RAMP:SYMMetry?
The :WGEN<w>:FUNCtion:RAMP:SYMMetry? query returns the currently set ramp
symmetry.
Return Format
<percent><NL>
<percent> ::= symmetry percentage from 0% to 100% in NR3 format
See Also • "Introduction to :WGEN<w> Commands" on page 1128
• ":WGEN<w>:FUNCtion" on page 1137