Keysight Technologies InfiniiVision 3000T X Series - :SBUS<n>:CAN:TRIGger:PATTern:DATA:DLC

740 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
29 :SBUS<n> Commands
:SBUS<n>:CAN:TRIGger:PATTern:DATA:DLC
(see page 1276)
Command Syntax
:SBUS<n>:CAN:TRIGger:PATTern:DATA:DLC <dlc>
<dlc> ::= integer between -1 (don't care) and 64, in NR1 format.
The :SBUS<n>:CAN:TRIGger:PATTern:DATA:DLC command specifies the DLC value
to be used in the CAN FD data trigger mode. A specific valid FD value can be
specified, or -1 can be specified to indicate "don't care".
Query Syntax
:SBUS<n>:CAN:TRIGger:PATTern:DATA:STARt?
The :SBUS<n>:CAN:TRIGger:PATTern:DATA:DLC? query returns the currently set
DLC value.
Return Format
<dlc><NL>
<dlc> ::= integer between -1 (don't care) and 64, in NR1 format.
See Also • ":SBUS<n>:CAN:TRIGger:PATTern:DATA" on page 739