Keysight Technologies InfiniiVision 3000T X Series User Manual

979
Keysight InfiniiVision 3000T X-Series Oscilloscopes
Programmer's Guide
31 :SYSTem Commands
Control basic system functions of the oscilloscope. See "Introduction to :SYSTem
Commands" on page 980.
Table 134 :SYSTem Commands Summary
Command Query Options and Query Returns
:SYSTem:DATE <date>
(see page 981)
:SYSTem:DATE? (see
page 981)
<date> ::= <year>,<month>,<day>
<year> ::= 4-digit year in NR1
format
<month> ::= {1,..,12 | JANuary |
FEBruary | MARch | APRil | MAY |
JUNe | JULy | AUGust | SEPtember
| OCTober | NOVember | DECember}
<day> ::= {1,..31}
:SYSTem:DSP <string>
(see page 982)
n/a <string> ::= up to 75 characters
as a quoted ASCII string
n/a :SYSTem:ERRor? (see
page 983)
<error> ::= an integer error code
<error string> ::= quoted ASCII
string.
See Error Messages (see
page 1233).
:SYSTem:LOCK <value>
(see page 984)
:SYSTem:LOCK? (see
page 984)
<value> ::= {{1 | ON} | {0 |
OFF}}
:SYSTem:PERSona[:MANu
facturer]
<manufacturer_string>
(see page 985)
:SYSTem:PERSona[:MANu
facturer]? (see
page 985)
<manufacturer_string> ::= quoted
ASCII string, up to 63 characters
:SYSTem:PERSona[:MANu
facturer]:DEFault
(see page 986)
n/a Sets manufacturer string to
"KEYSIGHT TECHNOLOGIES"
:SYSTem:PRESet (see
page 987)
n/a See :SYSTem:PRESet (see page 987)

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English