Keysight Technologies InfiniiVision 3000T X Series - :WMEMory<r>:SAVE

1170 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
36 :WMEMory<r> Commands
:WMEMory<r>:SAVE
(see page 1276)
Command Syntax
:WMEMory<r>:SAVE <source>
<r> ::= 1 to (# ref waveforms) in NR1 format
<source> ::= {CHANnel<n> | FUNCtion<m> | MATH<m>}
<n> ::= 1 to (# analog channels) in NR1 format
<m> ::= 1 to (# math functions) in NR1 format
The :WMEMory<r>:SAVE command copies the analog channel or math function
waveform to the specified reference waveform location.
See Also • Chapter 36, “:WMEMory<r> Commands,” starting on page 1165
• ":WMEMory<r>:DISPlay" on page 1168
NOTE
Only ADD or SUBtract math operations can be saved as reference waveforms.