Keysight Technologies InfiniiVision 3000T X Series

To Next Page

To Previous Page

:SAVE Commands 28

Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 691

:SAVE:WAVeform:FORMat

(see page 1276)

Command Syntax

:SAVE:WAVeform:FORMat <format>

<format> ::= {ASCiixy | CSV | BINary}

The :SAVE:WAVeform:FORMat command sets the waveform data format type:

• ASCiixy — creates comma-separated value files for each analog channel that is

displayed (turned on). The proper file extension for this format is ".csv".

• CSV — creates one comma-separated value file that contains information for all

analog channels that are displayed (turned on). The proper file extension for

this format is ".csv".

• BINary — creates an oscilloscope binary data format file. See the User's Guide

for a description of this format. The proper file extension for this format is ".bin".

Query Syntax

:SAVE:WAVeform:FORMat?

The :SAVE:WAVeform:FORMat? query returns the selected waveform data format

type.

Return Format

<format> ::= {ASC | CSV | BIN | NONE}

When NONE is returned, it indicates that an image file format is currently selected.

See Also • "Introduction to :SAVE Commands" on page 669

• ":SAVE:WAVeform[:STARt]" on page 690

• ":SAVE:WAVeform:LENGth" on page 692

• ":SAVE:IMAGe:FORMat" on page 675

Keysight Technologies InfiniiVision 3000T X Series - :SAVE:WAVeform:FORMat