Keysight Technologies InfiniiVision 3000T X Series - :SBUS<n>:CAN:COUNt:ERRor

722 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
29 :SBUS<n> Commands
:SBUS<n>:CAN:COUNt:ERRor
(see page 1276)
Query Syntax
:SBUS<n>:CAN:COUNt:ERRor?
Returns the error frame count.
Return Format
<frame_count><NL>
<frame_count> ::= integer in NR1 format
Errors • "-241, Hardware missing" on page 1235
See Also • ":SBUS<n>:CAN:COUNt:RESet" on page 724
• "Introduction to :SBUS<n> Commands" on page 697
• ":SBUS<n>:MODE" on page 701
• ":SBUS<n>:CAN Commands" on page 719