Keysight Technologies InfiniiVision 3000T X Series User Manual

Obsolete and Discontinued Commands 37
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 1215
:MTESt:AMASk:{SAVE | STORe}
(see page 1276)
Command Syntax
:MTESt:AMASk:{SAVE | STORe} "<filename>"
The :MTESt:AMASk:SAVE command saves the automask generated mask to a file.
If an automask has not been generated, an error occurs.
The <filename> parameter is an MS-DOS compatible name of the file, a maximum
of 254 characters long (including the path name, if used). The filename assumes
the present working directory if a path does not precede the file name.
See Also • "Introduction to :MTESt Commands" on page 551
NOTE
The :MTESt:AMASk:{SAVE | STORe} command is obsolete and is provided for backward
compatibility to previous oscilloscopes. Use the :SAVE:MASK[:STARt] command (see
page 679) instead.

Keysight Technologies InfiniiVision 3000T X Series Specifications

General

Brand	Keysight Technologies
Model	InfiniiVision 3000T X Series
Category	Test Equipment
Language	English