Keysight Technologies InfiniiVision 3000T X Series - :SEARch:TRANsition:SOURce

918 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
30 :SEARch Commands
:SEARch:TRANsition:SOURce
(see page 1276)
Command Syntax
:SEARch:TRANsition:SOURce <source>
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels) in NR1 format
The :SEARch:TRANsition:SOURce command selects the channel on which to
search for edge transitions.
Query Syntax
:SEARch:TRANsition:SOURce?
The :SEARch:TRANsition:SOURce? query returns the current transition search
source.
Return Format
<source><NL>
<source> ::= CHAN<n>
See Also • Chapter 30, “:SEARch Commands,” starting on page 889
• ":SEARch:MODE" on page 893
• ":SEARch:TRANsition:SLOPe" on page 917