Keysight Technologies InfiniiVision 3000T X Series - :CHANnel<n>:PROBe:MMODel

278 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
10 :CHANnel<n> Commands
:CHANnel<n>:PROBe:MMODel
(see page 1276)
Command Syntax
:CHANnel<n>:PROBe:MMODel <value>
<value> ::= {P5205 | P5210 | P6205 | P6241 | P6243 | P6245 | P6246
| P6247 | P6248 | P6249 | P6250 | P6251 | P670X | P671X | TCP202}
<n> ::= 1 to (# analog channels) in NR1 format
The :CHANnel<n>:PROBe:MMODel command sets the model number of the
supported Tektronix probe.
Query Syntax
:CHANnel<n>:PROBe:MMODel?
The :CHANnel<n>:PROBe:MMODel? query returns kthe model number setting.
Return Format
<value><NL>
<value> ::= {P5205 | P5210 | P6205 | P6241 | P6243 | P6245 | P6246
| P6247 | P6248 | P6249 | P6250 | P6251 | P670X | P671X | TCP202}
See Also • ":CHANnel<n>:PROBe:ID" on page 277