222 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
6 Root (:) Commands
Return Format <value><NL>
<value> ::= integer in NR1 format.
See Also • "Introduction to Root (:) Commands" on page 194
• ":CHANnel<n>:PROTection" on page 281
• ":OPEE (Operation Status Enable Register)" on page 213
• ":OVLenable (Overload Event Enable Register)" on page 219
• "*STB (Read Status Byte)" on page 186
• "*SRE (Service Request Enable)" on page 184
1 Channel 2 OVL Overload has occurred on Channel 2 input.
0 Channel 1 OVL Overload has occurred on Channel 1 input.
Table 84 Overload Event Register (OVLR) (continued)
Bit Description When Set (1 = High = True), Indicates:
To Next Page
Loading...
