Keysight Technologies InfiniiVision 3000T X Series - Page 366

366 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
18 :FUNCtion<m> Commands
:FUNCtion<m>:CLEar
(see page 376)
n/a n/a
:FUNCtion<m>:DISPlay
{{0 | OFF} | {1 |
ON}} (see page 377)
:FUNCtion<m>:DISPlay?
(see page 377)
{0 | 1}
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>[:FFT]:CE
NTer <frequency> (see
page 378)
:FUNCtion<m>[:FFT]:CE
NTer? (see page 378)
<frequency> ::= the current
center frequency in NR3 format.
The range of legal values is from
0 Hz to 25 GHz.
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:FFT:FREQ
uency:STARt
<frequency> (see
page 379)
:FUNCtion<m>:FFT:FREQ
uency:STARt? (see
page 379)
<frequency> ::= the start
frequency in NR3 format.
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:FFT:FREQ
uency:STOP
<frequency> (see
page 380)
:FUNCtion<m>:FFT:FREQ
uency:STOP? (see
page 380)
<frequency> ::= the stop
frequency in NR3 format.
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>[:FFT]:SP
AN <span> (see
page 381)
:FUNCtion<m>[:FFT]:SP
AN? (see page 381)
<span> ::= the current frequency
span in NR3 format.
Legal values are 1 Hz to 100 GHz.
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>[:FFT]:VT
YPe <units> (see
page 382)
:FUNCtion<m>[:FFT]:VT
YPe? (see page 382)
<units> ::= {DECibel | VRMS}
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>[:FFT]:WI
NDow <window> (see
page 383)
:FUNCtion<m>[:FFT]:WI
NDow? (see page 383)
<window> ::= {RECTangular |
HANNing | FLATtop | BHARris}
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:FREQuenc
y:HIGHpass <3dB_freq>
(see page 384)
:FUNCtion<m>:FREQuenc
y:HIGHpass? (see
page 384)
<3dB_freq> ::= 3dB cutoff
frequency value in NR3 format
<m> ::= 1 to (# math functions)
in NR1 format
:FUNCtion<m>:FREQuenc
y:LOWPass <3dB_freq>
(see page 385)
:FUNCtion<m>:FREQuenc
y:LOWPass? (see
page 385)
<3dB_freq> ::= 3dB cutoff
frequency value in NR3 format
<m> ::= 1 to (# math functions)
in NR1 format
Table 96 :FUNCtion<m> Commands Summary (continued)
Command Query Options and Query Returns