Keysight Technologies InfiniiVision 3000T X Series - Page 117

Commands Quick Reference 4
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 117
:SAVE:WAVeform:LENGth
:MAX {{0 | OFF} | {1
| ON}} (see page 693)
:SAVE:WAVeform:LENGth
:MAX? (see page 693)
{0 | 1}
:SAVE:WAVeform:SEGMen
ted <option> (see
page 694)
:SAVE:WAVeform:SEGMen
ted? (see page 694)
<option> ::= {ALL | CURRent}
:SAVE:WMEMory:SOURce
<source> (see
page 695)
:SAVE:WMEMory:SOURce?
(see page 695)
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
NOTE: Only ADD or SUBtract math
operations can be saved as
reference waveforms.
<return_value> ::= <source>
:SAVE:WMEMory[:STARt]
[<file_name>] (see
page 696)
n/a <file_name> ::= quoted ASCII
string
If extension included in file
name, it must be ".h5".
Table 24 :SAVE Commands Summary (continued)
Command Query Options and Query Returns
Table 25 General :SBUS<n> Commands Summary
Command Query Options and Query Returns
:SBUS<n>:DISPlay {{0
| OFF} | {1 | ON}}
(see page 700)
:SBUS<n>:DISPlay?
(see page 700)
{0 | 1}
:SBUS<n>:MODE <mode>
(see page 701)
:SBUS<n>:MODE? (see
page 701)
<mode> ::= {A429 | CAN | FLEXray
| I2S | IIC | LIN | M1553 | SENT
| SPI | UART}
Table 26 :SBUS<n>:A429 Commands Summary
Command Query Options and Query Returns
:SBUS<n>:A429:AUToset
up (see page 704)
n/a n/a
:SBUS<n>:A429:BASE
<base> (see page 705)
:SBUS<n>:A429:BASE?
(see page 705)
<base> ::= {BINary | HEX}