Keysight Technologies InfiniiVision 3000T X Series - Page 1176

1176 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
37 Obsolete and Discontinued Commands
:CHANnel:THReshold (see
page 1184)
:POD<n>:THReshold (see
page 587) or
:DIGital<d>:THReshold (see
page 313)
:CHANnel2:SKEW (see
page 1185)
:CHANnel<n>:PROBe:SKEW
(see page 279)
:CHANnel<n>:INPut (see
page 1186)
:CHANnel<n>:IMPedance (see
page 271)
:CHANnel<n>:PMODe (see
page 1187)
none
:DISPlay:CONNect (see
page 1188)
:DISPlay:VECTors (see
page 332)
:DISPlay:ORDer (see
page 1189)
none
:ERASe (see page 1190) :DISplay:CLEar (see page 324)
:EXTernal:PMODe (see
page 1191)
none
FUNCtion1, FUNCtion2 :FUNCtion Commands (see
page 365)
ADD not included
:FUNCtion Commands :FUNCtion2 Commands (see
page 365)
:FUNCtion commands (with no
<m> number) map to
:FUNCtion2. This allows legacy
programs to work without
change.
:FUNCtion:GOFT:OPERation
(see page 1192)
:FUNCtion1:OPERation (see
page 390)
GOFT maps to FUNCtion1.
:FUNCtion:GOFT:SOURce1 (see
page 1193)
:FUNCtion1:SOURce1 (see
page 398)
GOFT maps to FUNCtion1.
:FUNCtion:GOFT:SOURce2 (see
page 1194)
:FUNCtion1:SOURce2 (see
page 400)
GOFT maps to FUNCtion1.
:FUNCtion:SOURce (see
page 1195)
:FUNCtion:SOURce1 (see
page 398)
Obsolete command has ADD,
SUBTract, and MULTiply
parameters; current command
has GOFT parameter.
:FUNCtion:VIEW (see
page 1196)
:FUNCtion:DISPlay (see
page 377)
:HARDcopy:DESTination (see
page 1197)
:HARDcopy:FILename (see
page 1198)
Obsolete Command Current Command Equivalent Behavior Differences