Keysight Technologies InfiniiVision 3000T X Series - Page 128

128 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
Table 33 :SBUS<n>:SENT Commands Summary
Command Query Options and Query Returns
:SBUS<n>:SENT:CLOCk
<period> (see
page 820)
:SBUS<n>:SENT:CLOCk?
(see page 820)
<period> ::= the nominal clock
period (tick), from 1 us to 300
us, in NR3 format.
:SBUS<n>:SENT:CRC
<format> (see
page 821)
:SBUS<n>:SENT:CRC?
(see page 821)
<format> ::= {LEGacy |
RECommended}
:SBUS<n>:SENT:DISPlay
<base> (see page 822)
:SBUS<n>:SENT:DISPlay
? (see page 822)
<base> ::= {HEX | DECimal |
SYMBolic}
:SBUS<n>:SENT:FORMat
<decode> (see
page 824)
:SBUS<n>:SENT:FORMat?
(see page 824)
<decode> ::= {NIBBles | FSIGnal |
FSSerial | FESerial | SSERial |
ESERial}
:SBUS<n>:SENT:IDLE
<state> (see page 826)
:SBUS<n>:SENT:IDLE?
(see page 826)
<state> ::= {LOW | HIGH}
:SBUS<n>:SENT:LENGth
<#_nibbles> (see
page 827)
:SBUS<n>:SENT:LENGth?
(see page 827)
<#_nibbles> ::= from 1-6, in NR1
format.
:SBUS<n>:SENT:PPULse
{{0 | OFF} | {1 |
ON}} (see page 828)
:SBUS<n>:SENT:PPULse?
(see page 828)
{0 | 1}
:SBUS<n>:SENT:SIGNal<
s>:DISPlay {{0 | OFF}
| {1 | ON}} (see
page 829)
:SBUS<n>:SENT:SIGNal<
s>:DISPlay? (see
page 829)
<s> ::= 1-6, in NR1 format.
{0 | 1}
:SBUS<n>:SENT:SIGNal<
s>:LENGth <length>
(see page 830)
:SBUS<n>:SENT:SIGNal<
s>:LENGth? (see
page 830)
<s> ::= 1-6, in NR1 format.
<length> ::= from 1-24, in NR1
format.
:SBUS<n>:SENT:SIGNal<
s>:MULTiplier
<multiplier> (see
page 832)
:SBUS<n>:SENT:SIGNal<
s>:MULTiplier? (see
page 832)
<s> ::= 1-6, in NR1 format.
<multiplier> ::= from 1-24, in
NR3 format.
:SBUS<n>:SENT:SIGNal<
s>:OFFSet <offset>
(see page 833)
:SBUS<n>:SENT:SIGNal<
s>:OFFSet? (see
page 833)
<s> ::= 1-6, in NR1 format.
<offset> ::= from 1-24, in NR3
format.
:SBUS<n>:SENT:SIGNal<
s>:ORDer <order> (see
page 834)
:SBUS<n>:SENT:SIGNal<
s>:ORDer? (see
page 834)
<s> ::= 1-6, in NR1 format.
<order> ::= {MSNFirst | LSNFirst}
:SBUS<n>:SENT:SIGNal<
s>:STARt <position>
(see page 836)
:SBUS<n>:SENT:SIGNal<
s>:STARt? (see
page 836)
<s> ::= 1-6, in NR1 format.
<position> ::= from 0-23, in NR1
format.