Keysight Technologies InfiniiVision 3000T X Series - Page 135

Commands Quick Reference 4
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 135
Table 39 :SEARch:PEAK Commands Summary
Command Query Options and Query Returns
:SEARch:PEAK:EXCursio
n <delta_level> (see
page 906)
:SEARch:PEAK:EXCursio
n? (see page 906)
<delta_level> ::= required
change in level to be recognized
as a peak, in NR3 format.
:SEARch:PEAK:NPEaks
<number> (see
page 907)
:SEARch:PEAK:NPEaks?
(see page 907)
<number> ::= max number of peaks
to find, 1-10 in NR1 format.
:SEARch:PEAK:SOURce
<source> (see
page 908)
:SEARch:PEAK:SOURce?
(see page 908)
<source> ::= {FUNCtion<m> |
MATH<m>} (must be FFT)
<m> ::= 1 to 4 in NR1 format
:SEARch:PEAK:THReshol
d <level> (see
page 909)
:SEARch:PEAK:THReshol
d? (see page 909)
<level> ::= necessary level to be
considered a peak, in NR3 format.
Table 40 :SEARch:RUNT Commands Summary
Command Query Options and Query Returns
:SEARch:RUNT:POLarity
<polarity> (see
page 911)
:SEARch:RUNT:POLarity
? (see page 911)
<polarity> ::= {POSitive |
NEGative | EITHer}
:SEARch:RUNT:QUALifie
r <qualifier> (see
page 912)
:SEARch:RUNT:QUALifie
r? (see page 912)
<qualifier> ::= {GREaterthan |
LESSthan | NONE}
:SEARch:RUNT:SOURce
<source> (see
page 913)
:SEARch:RUNT:SOURce?
(see page 913)
<source> ::= CHANnel<n>
<n> ::= 1 to (# analog channels)
in NR1 format
:SEARch:RUNT:TIME
<time>[suffix] (see
page 914)
:SEARch:RUNT:TIME?
(see page 914)
<time> ::= floating-point number
in NR3 format
[suffix] ::= {s | ms | us | ns |
ps}
Table 41 :SEARch:TRANsition Commands Summary
Command Query Options and Query Returns
:SEARch:TRANsition:QU
ALifier <qualifier>
(see page 916)
:SEARch:TRANsition:QU
ALifier? (see
page 916)
<qualifier> ::= {GREaterthan |
LESSthan}
:SEARch:TRANsition:SL
OPe <slope> (see
page 917)
:SEARch:TRANsition:SL
OPe? (see page 917)
<slope> ::= {NEGative | POSitive}