Keysight Technologies InfiniiVision 3000T X Series - Page 137

Commands Quick Reference 4
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 137
Table 43 :SEARch:SERial:CAN Commands Summary
Command Query Options and Query Returns
:SEARch:SERial:CAN:MO
DE <value> (see
page 927)
:SEARch:SERial:CAN:MO
DE? (see page 927)
<value> ::= {IDData | DATA |
IDRemote | IDEither | ERRor |
ACKerror | FORMerror | STUFferror
| CRCerror | ALLerrors | OVERload
| MESSage | MSIGnal}
:SEARch:SERial:CAN:PA
TTern:DATA <string>
(see page 929)
:SEARch:SERial:CAN:PA
TTern:DATA? (see
page 929)
<string> ::= "0xnn...n" where n
::= {0,..,9 | A,..,F | X} for
hexadecimal
:SEARch:SERial:CAN:PA
TTern:DATA:LENGth
<length> (see
page 930)
:SEARch:SERial:CAN:PA
TTern:DATA:LENGth?
(see page 930)
<length> ::= integer from 1 to 8
in NR1 format
:SEARch:SERial:CAN:PA
TTern:ID <string>
(see page 931)
:SEARch:SERial:CAN:PA
TTern:ID? (see
page 931)
<string> ::= "0xnn...n" where n
::= {0,..,9 | A,..,F | X} for
hexadecimal
:SEARch:SERial:CAN:PA
TTern:ID:MODE <value>
(see page 932)
:SEARch:SERial:CAN:PA
TTern:ID:MODE? (see
page 932)
<value> ::= {STANdard | EXTended}
:SEARch:SERial:CAN:SY
MBolic:MESSage <name>
(see page 933)
:SEARch:SERial:CAN:SY
MBolic:MESSage? (see
page 933)
<name> ::= quoted ASCII string
:SEARch:SERial:CAN:SY
MBolic:SIGNal <name>
(see page 934)
:SEARch:SERial:CAN:SY
MBolic:SIGNal? (see
page 934)
<name> ::= quoted ASCII string
:SEARch:SERial:CAN:SY
MBolic:VALue <data>
(see page 935)
:SEARch:SERial:CAN:SY
MBolic:VALue? (see
page 935)
<data> ::= value in NR3 format
Table 44 :SEARch:SERial:FLEXray Commands Summary
Command Query Options and Query Returns
:SEARch:SERial:FLEXra
y:CYCLe <cycle> (see
page 937)
:SEARch:SERial:FLEXra
y:CYCLe? (see
page 937)
<cycle> ::= {ALL | <cycle #>}
<cycle #> ::= integer from 0-63
:SEARch:SERial:FLEXra
y:DATA <string> (see
page 938)
:SEARch:SERial:FLEXra
y:DATA? (see page 938)
<string> ::= "0xnn...n" where n
::= {0,..,9 | A,..,F | X }
:SEARch:SERial:FLEXra
y:DATA:LENGth
<length> (see
page 939)
:SEARch:SERial:FLEXra
y:DATA:LENGth? (see
page 939)
<length> ::= integer from 1 to 12
in NR1 format