Keysight Technologies InfiniiVision 3000T X Series - Page 156

156 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
4 Commands Quick Reference
:WAVeform:VIEW <view>
(see page 1118)
:WAVeform:VIEW? (see
page 1118)
<view> ::= {MAIN}
n/a :WAVeform:XINCrement?
(see page 1119)
<return_value> ::= x-increment
in the current preamble in NR3
format
n/a :WAVeform:XORigin?
(see page 1120)
<return_value> ::= x-origin
value in the current preamble in
NR3 format
n/a :WAVeform:XREFerence?
(see page 1121)
<return_value> ::= 0
(x-reference value in the current
preamble in NR1 format)
n/a :WAVeform:YINCrement?
(see page 1122)
<return_value> ::= y-increment
value in the current preamble in
NR3 format
n/a :WAVeform:YORigin?
(see page 1123)
<return_value> ::= y-origin in
the current preamble in NR3
format
n/a :WAVeform:YREFerence?
(see page 1124)
<return_value> ::= y-reference
value in the current preamble in
NR1 format
Table 66 :WAVeform Commands Summary (continued)
Command Query Options and Query Returns
Table 67 :WGEN<w> Commands Summary
Command Query Options and Query Returns
:WGEN<w>:ARBitrary:BY
Teorder <order> (see
page 1129)
:WGEN<w>:ARBitrary:BY
Teorder? (see
page 1129)
<order> ::= {MSBFirst | LSBFirst}
<w> ::= 1 or 2 in NR1 format
:WGEN<w>:ARBitrary:DA
TA {<binary> |
<value>, <value> ...}
(see page 1130)
n/a <binary> ::= floating point
values between -1.0 to +1.0 in
IEEE 488.2 binary block format
<value> ::= floating point values
between -1.0 to +1.0 in
comma-separated format
<w> ::= 1 or 2 in NR1 format
n/a :WGEN<w>:ARBitrary:DA
TA:ATTRibute:POINts?
(see page 1131)
<points> ::= number of points in
NR1 format
<w> ::= 1 or 2 in NR1 format
:WGEN<w>:ARBitrary:DA
TA:CLEar (see
page 1132)
n/a <w> ::= 1 or 2 in NR1 format