Common (*) Commands 5
Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide 173
Return Format <status><NL>
<status> ::= 0,..,255; an integer in NR1 format.
See Also • "Introduction to Common (*) Commands" on page 168
• "*ESE (Standard Event Status Enable)" on page 170
• "*OPC (Operation Complete)" on page 176
• "*CLS (Clear Status)" on page 169
• ":SYSTem:ERRor" on page 983
Reading the Standard Event Status Register clears it. High or 1 indicates the bit is true.