Keysight Technologies InfiniiVision 3000T X Series - Page 218

218 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
6 Root (:) Commands
Return Format <value><NL>
<value> ::= integer in NR1 format.
See Also • "Introduction to Root (:) Commands" on page 194
• ":CHANnel<n>:PROTection" on page 281
• ":OPEE (Operation Status Enable Register)" on page 213
• ":OPERegister:CONDition (Operation Status Condition Register)" on page 215
• ":OVLenable (Overload Event Enable Register)" on page 219
• ":OVLRegister (Overload Event Register)" on page 221
• "*STB (Read Status Byte)" on page 186
• "*SRE (Service Request Enable)" on page 184
• ":MTERegister[:EVENt] (Mask Test Event Event Register)" on page 211
• ":MTEenable (Mask Test Event Enable Register)" on page 209