4 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
• Chapter 10, “:CHANnel<n> Commands,” starting on page 265, describes
commands that control all oscilloscope functions associated with individual
analog channels or groups of channels.
• Chapter 12, “:DEMO Commands,” starting on page 299, describes commands
that control the education kit (Option EDU) demonstration signals that can be
output on the oscilloscope's Demo 1 and Demo 2 terminals.
• Chapter 13, “:DIGital<d> Commands,” starting on page 307, describes
commands that control all oscilloscope functions associated with individual
digital channels.
• Chapter 14, “:DISPlay Commands,” starting on page 315, describes commands
that control how waveforms, graticule, and text are displayed and written on
the screen.
• Chapter 15, “:DVM Commands,” starting on page 333, describes commands
that control the optional DSOXDVM digital voltmeter analysis feature.
• Chapter 16, “:EXTernal Trigger Commands,” starting on page 339, describes
commands that control the input characteristics of the external trigger input.
• Chapter 18, “:FUNCtion<m> Commands,” starting on page 365, describes
commands that control math waveforms.
• Chapter 19, “:HARDcopy Commands,” starting on page 403, describes
commands that set and query the selection of hardcopy device and formatting
options.
• Chapter 20, “:LISTer Commands,” starting on page 421, describes commands
that turn on/off the Lister display for decoded serial data and get the Lister
data.
• Chapter 21, “:MARKer Commands,” starting on page 425, describes commands
that set and query the settings of X-axis markers (X1 and X2 cursors) and the
Y-axis markers (Y1 and Y2 cursors).
• Chapter 22, “:MEASure Commands,” starting on page 443, describes
commands that select automatic measurements (and control markers).
• Chapter 23, “:MEASure Power Commands,” starting on page 525, describes
measurement commands that are available when the DSOX4PWR power
measurements and analysis application is licensed and enabled.
• Chapter 24, “:MTESt Commands,” starting on page 549, describes commands
that control the mask test features provided with Option LMT.
• Chapter 25, “:POD Commands,” starting on page 583, describes commands
that control all oscilloscope functions associated with groups of digital
channels.
• Chapter 26, “:POWer Commands,” starting on page 589, describes commands
that control the DSOX4PWR power measurement application.
• Chapter 27, “:RECall Commands,” starting on page 657, describes commands
that recall previously saved oscilloscope setups, reference waveforms, or
masks.
To Next Page
Loading...
Need help?
General
