Keysight Technologies InfiniiVision 3000T X Series - Page 456

456 Keysight InfiniiVision 3000T X-Series Oscilloscopes Programmer's Guide
22 :MEASure Commands
:MEASure:VMIN
[<source>] (see
page 515)
:MEASure:VMIN?
[<source>] (see
page 515)
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= minimum
voltage of the selected waveform
in NR3 format
:MEASure:VPP
[<source>] (see
page 516)
:MEASure:VPP?
[<source>] (see
page 516)
<source> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= voltage
peak-to-peak of the selected
waveform in NR3 format
:MEASure:VRATio
[<interval>][,<source
1>] [,<source2>] (see
page 517)
:MEASure:VRATio?
[<interval>][,<source
1>] [,<source2>] (see
page 517)
<interval> ::= {CYCLe | DISPlay}
<source1,2> ::= {CHANnel<n> |
FUNCtion<m> | MATH<m> |
WMEMory<r>}
<n> ::= 1 to (# analog channels)
in NR1 format
<m> ::= 1 to (# math functions)
in NR1 format
<r> ::= 1 to (# ref waveforms) in
NR1 format
<return_value> ::= the ratio
value in dB in NR3 format
Table 100 :MEASure Commands Summary (continued)
Command Query Options and Query Returns